Reabilitação oral com próteses parciais removíveis após restabelecimento de dimensão vertical de oclusão e tratamento multidisciplinar: relato de caso / Oral rehabilitation with removable partial dentures after restoration of the vertical dimension of occlusion and multidisciplinary treatment: case report

As próteses parciais removíveis (PPRs) são uma alternativa de tratamento viável na prática clínica para reabilitar arcos parcialmente desdentados. Entretanto, o planejamento dessas próteses e preparo bucal prévio são frequentemente negligenciados. O presente artigo tem como objetivo relatar o caso clínico de uma reabilitação oral com PPRs superior e inferior após abordagem multidisciplinar, de modo a enfatizar as fases de um planejamento criterioso e de preparo prévio dos dentes pilares, visando o sucesso e a longevidade da reabilitação. Paciente do sexo masculino de 57 anos de idade compareceu à clínica da Faculdade de Odontologia de Bauru, Universidade de São Paulo, queixando-se da estética de seu sorriso e de algumas ausências dentárias. O indivíduo utilizava uma PPR provisória inferior insatisfatória e apresentava perda de dimensão vertical de oclusão (DVO). Após o exame clínico, radiográfico e estudo do caso em articulador semi-ajustável, realizou-se o planejamento com abordagens restauradoras, endodônticas, periodontais e protéticas. Após tratamento periodontal, foi realizada endodontia dos elementos 12, 15 e 47, confecção de núcleos e coroas nos dentes 12 e 15, restauração a nível gengival para apoio residual no dente 47, restaurações nos dentes 11, 13, 22, 24 e 44 e, por fim, a confecção das PPRs superior e inferior. A abordagem multidisciplinar utilizada neste caso clínico viabilizou o restabelecimento da DVO e possibilitou o sucesso da reabilitação protética(AU)

Removable partial dentures (RPDs) are a viable treatment alternative in clinical practice to rehabilitate partially edentulous arches. However, the planning of these dentures and prior oral preparation are often neglected. This article aims to report the clinical case of an oral rehabilitation with upper and lower RPDs after a multidisciplinary approach, to emphasize the phases of careful planning and prior preparation of the abutment teeth, aiming at the success and longevity of the rehabilitation. A 57-year-old male patient came to the clinic of the Bauru School of Dentistry, University of São Paulo, complaining about the esthetics of his smile and some missing teeth. The subject was using an unsatisfactory lower provisional prosthesis and had a loss of vertical dimension of occlusion (OVD). After the clinical and radiographic examination and the case study in a semi-adjustable articulator, planning was carried out with restorative, endodontic, periodontal and prosthetic approaches. After periodontal treatment, endodontics were performed on elements 12, 15 and 47, creation of cores and crowns on teeth 12 and 15, restoration at the gingival level for residual support on tooth 47, restorations on teeth 11, 13, 22, 24 and 44 and, finally, the making of the upper and lower PPRs. The multidisciplinary approach used in this clinical case enabled the restoration of the OVD and enabled the success of the oral rehabilitation(AU)

Disposable Fox Ruler: a proposal to avoid cross-contamination / Régua de Fox descartável: uma proposta para evitar a contaminação cruzada

ABSTRACT Numerous pathogens, including SARS-CoV-2, can remain viable on surfaces over days, which favors cross-contamination. Preventive measures are essential to prevent infections and control the spread of COVID-19. Fox ruler is an essential device in the clinical planning of complete dentures and the contact with the patient's oral fluids during handling is unavoidable. Despite its importance, the conventional polycarbonate Fox ruler is easily damaged in the sterilization process. Therefore, the purpose of this article is to propose the use of a disposable Fox ruler. The confection is carried out in a simple way with wooden toothpicks joined by cyanoacrylate glue, following the same shape as the conventional one, but with the additional advantage of being made in an individual size according to the upper edge. The proposed disposable Fox ruler makes it possible to obtain the parallelism of the upper wax roller with the bipupillary line and with the Camper plane. Therefore, the disposable device described in this article was able to perform the same functions as the conventional one, in a practical way, without risks of cross contamination and with low cost.

RESUMO Vários patógenos, incluindo SARS-CoV-2, são capazes de permanecer viáveis em superfícies durante dias, o que favorece a contaminação cruzada. Medidas preventivas são essenciais para prevenir infecções e controlar a propagação da COVID- 19. A régua de Fox é um dispositivo essencial no planejamento clínico de próteses totais e é inevitável o contato com os fluidos orais do paciente, durante seu manejo. Apesar de sua importância, a régua de Fox convencional de policarbonato é facilmente danificada com o processo de esterilização. Portanto, o objetivo deste artigo é propor a utilização de uma régua Fox descartável. A confecção é feita de forma simples com palitos de madeira unidos por cola de cianoacrilato, seguindo o mesmo formato do convencional, mas com a vantagem adicional de ser produzida em tamanho individualizado de acordo com o rebordo superior. A régua Fox descartável proposta permite obter o paralelismo do rolete de cera superior com a linha bipupilar e com o plano de Camper. Portanto, o dispositivo descartável descrito neste artigo foi capaz de desempenhar as mesmas funções do convencional, de forma prática, sem riscos de contaminação cruzada e com baixo custo.

Surgical restoration of interocclusal space and maxillary sinus floor elevation for prosthetic purposes: a case report / Reestabelecimento cirúrgico do espaço interoclusal e levantamento do assoalho do seio maxilar para fins protéticos: relato de caso

Aim: To report on a surgical procedure with osteotomy in the posterior region of the maxilla and lifting of the maxillary sinus floor for the installation of implants and rehabilitation with implant-supported crowns. Case report: A 54-year-old female patient was admitted to the dental clinic, complaining that she was dissatisfied with her smile and the missing teeth. After the clinical, radiographic, and tomographic examinations, a well as a case study of a semi-adjustable articulator, multidisciplinary planning was carried out using surgical, endodontic, periodontic, orthodontic, and prosthetic approaches. A lack of interocclusal space was observed in the posterior region of the maxilla. After osteotomy in tuberosity, maxillary sinus lift using an autogenous bone graft was performed, and three implants were installed. After the osseointegration period, provisional crowns were placed, followed by definitive metal-ceramic crowns. Conclusion:The surgical techniques used in this clinical case made it possible to install implants in a single clinical session for prosthetic rehabilitation.

Introdução: A reabilitação oral envolve um tratamento integrado, que inclui diversas especialidades odontológicas para restabelecer os aspectos estéticos e funcionais, resultando também na satisfação do paciente. Objetivo: O objetivo foi relatar um procedimento cirúrgico com osteotomia na região posterior da maxila e levantamento do assoalho do seio maxilar para instalação de implantes e reabilitação com coroas implantossuportadas. Relato de caso: Paciente do sexo feminino, 54 anos, apresentou-se ao ambulatório queixando-se de insatisfação com o sorriso e com a falta de dentes. Após os exames clínicos, radiográficos, tomográficos e estudo de caso em articulador semi-ajustável, foi realizado o planejamento multidisciplinar com abordagens cirúrgica, endodôntica, periodontal, ortodôntica e protética. Observou-se falta de espaço interoclusal na região posterior da maxila. Após a osteotomia na tuberosidade, foi realizada a elevação do seio maxilar com enxerto ósseo autógeno e foram instalados três implantes. Posteriormente, no período de osseointegração, foram colocadas coroas provisórias e, posteriormente, coroas metalocerâmicas definitivas. Conclusão: As técnicas cirúrgicas utilizadas neste caso clínico possibilitaram a instalação de implantes em uma única sessão clínica para a reabilitação protética.

Dentin bond strength evaluation between a conventional and universal adhesive using etch-and-rinse strategy

Aim: The aim of this study was to compare the microtensile bond strength (µTBS) and the characteristics of the adhesive interface of Scotchbond Universal - SU ­ etch-and-rise mode (3M ESPE) and Adper Scotchbond Multi-Purpose - MP (3M ESPE) to dentin over time. Methods: Class I cavity preparations were performed in 60 human molars that were randomly divided according to the dentin bonding system (DBS) used (n=30): (1) Acid conditioning + SU and (2) Acid conditioning + MP. For bonding strength (BS) analysis, 30 teeth (n = 15) were sectioned into sticks and submitted to the microtensile test in a universal testing machine after 24 hours and 12 months. The adhesive interface of the others 30 teeth was analyzed in a confocal microscope after 24 hours and 12 months. The data of µTBS were analyzed by two-way repeated measures ANOVA and Tukey's HSD (α = 0.05). Results: SU presented the lowest DBS compared to MP (p=0.000). Time did not influenced DBS for both adhesive systems (p=0.177). Confocal microscopy analysis showed no cracks between both adhesive systems tested. Conclusion: The results indicate that MP - µTBS showed a better performance compared to SU in total-etch mode

Esquema oclusal em prótese total / Occlusal scheme in complete dentures

O objetivo foi revisar a literatura e discutir os conceitos oclusais em reabilitações orais com próteses totais, enfatizando as vantagens e as necessidades de cada esquema oclusal. Realizou-se uma busca nas bases de dados PubMed, SciELO, Google Scholar e em li-vros didáticos com as palavras-chave "Oclusão Dentária", "Oclusão Dentária Balanceada", "Orientação de Canino", "Planejamento de Dentadura", "Planejamento de Prótese Dentá-ria" e "Prótese Total" e com os operadores booleanos AND (E), OR (OU), NOT (MENOS). Dentro dos esquemas oclusais disponíveis para o planejamento protético, a oclusão balan-ceada bilateral (OBB) e a oclusão guiada pelo canino (OGC) foram as mais estudadas e discutidas na desoclusão de próteses totais. Os estudos indicam que o tipo de oclusão pode interferir na atividade muscular do sistema estomatognático, na eficiência mastigatória, na reabsorção óssea, na retenção e estabilidade das próteses removíveis e na satisfação do pa-ciente. Na literatura examinada, foi perceptível a recomendação da OGC como o esquema oclusal de preferência no planejamento das próteses totais, pois os resultados dos estudos indicam menor atividade muscular durante a mastigação, melhor retenção e estabilidade da prótese total. A OGC é o esquema oclusal mais simples e fácil de ser obtido comparada à OBB, beneficia a fonética, é esteticamente preferida pelos pacientes e, em termos de qua-lidade de vida, autopercepção da força mastigatória e oclusal, tem se mostrado satisfatória. Conclui-se que a OGC pode ser recomendada como um esquema oclusal favorável para as reabilitações orais com próteses totais.Descritores: Oclusão Dentária. Oclusão Dentária Balanceada. Orientação de canino. Pró-tese Total. Planejamento de Prótese Dentária.

The aim was to review the literature and discuss the occlusal concepts in oral rehabilitation with complete dentures, emphasizing the advantages and needs of each occlusal scheme. A search was carried out on the databases PubMed, SciELO, Google Scholar and in textbooks, using "Dental Occlusion"; "Dental Occlusion Balanced"; "Canino guidance"; "Denture complete"; and "Denture design" as keywords and the Boolean operators AND, OR, and NOT. Among the occlusal schemes available for prosthetic planning, the bilateral balanced occlusion (BBO) and the canine guided occlusion (CGO) were the most studied and discussed in the disocclusion of complete dentures. Studies indicate the type of occlusion can interfere with muscle activity of the stomatognathic system, masticatory efficiency, bone resorption, retention and stability of removable dentures, and patient satisfaction. In the literature examined, the recommendation of the CGO as the preferred occlusal scheme in the planning of complete dentures was noticeable. The results of the studies indicate less muscle activity during mastication, better retention, and stability of the total denture. It is simpler and easier to obtain this occlusal scheme than the BBO. CGO benefits phonetics; it is aesthetically preferred by patients; and, in terms of quality of life, self-perception of masticatory and occlusal strength, has shown to be satisfactory. We conclude that CGO can be recommended as a favorable occlusal scheme for oral rehabilitation with complete dentures.

A novel acrylic resin palatal device contaminated with Candida albicans biofilm for denture stomatitis induction in Wistar rats

Abstract Denture stomatitis is the most frequent oral lesion in removable prosthesis wearers, with high recurrence rates and a complex treatment. Objective This study describes a protocol to obtain and to contaminate a palatal device with Candida albicans biofilm that could be used for an animal model of denture stomatitis. Methodology Acrylic resin devices (N=41) were obtained from impressions of the palates of Wistar rats with individual trays and polyether. The efficacy of microwave irradiation (MW), ultraviolet light (UV), or ultrasonic bath (US) was assessed by colony viability and spectrophotometric analyses (n=5) in order to select the most appropriate method for sterilizing the devices. Then, different devices (n=5) were contaminated with C. albicans and evaluated by CFU/mL determination, scanning electron microscopy, and laser confocal microscopy. Device stabilization was assessed with either autopolymerizing acrylic resins or a self-adhesive resin cement (n=2). The spectrophotometric data were analyzed by one-way ANOVA followed by the Tukey's HSD post-hoc test (α=0.05). Results MW was the only method capable of sterilizing the devices, and the contamination protocol developed a mature and viable C. albicans biofilm (~1.2 x 106 CFU/mL). The self-adhesive resin cement was the best stabilization material. Conclusions This acrylic resin palatal device was designed to be similar to the clinical situation of contaminated prostheses, with easy manufacturing and handling, effective stabilization, and satisfactory contamination. Thus, the acrylic device can be a valuable tool in the development of denture stomatitis in rats.

Surface morphology and in vitro leachability of soft liners modified by the incorporation of antifungals for denture stomatitis treatment

Abstract Objective: To evaluate the surface morphology and in vitro leachability of temporary soft linings modified by the incorporation of antifungals in minimum inhibitory concentrations (MIC) for Candida albicans biofilm. Methodology:Specimens of soft lining materials Softone and Trusoft were made without (control) or with the addition of nystatin (Ny), miconazole (Mc), ketoconazole (Ke), chlorhexidine diacetate (Chx), or itraconazole (It) at their MIC for C. albicans biofilm. The surface analyses were performed using Confocal laser scanning microscopy after 24 h, 7 days, or 14 days of immersion in distilled water at 37ºC. In vitro leachability of Chx or Ny from the modified materials was also measured using Ultraviolet visible spectroscopy for up to 14 days of immersion in distilled water at 37ºC. Data (µg/mL) were submitted to ANOVA 1-factor/Bonferroni (α=0.05). Results: Softone had a more irregular surface than Trusoft. Morphological changes were noted in both materials with increasing immersion time, particularly, in those containing drugs. Groups containing Chx and It presented extremely porous and irregular surfaces. Both materials had biexponential release kinetics. Softone leached a higher concentration of the antifungals than Trusoft (p=0.004), and chlorhexidine was released at a higher concentration than nystatin (p<0.001). Conclusions: The surface of the soft lining materials changed more significantly with the addition of Chx or It. Softone released a higher concentration of drugs than Trusoft did, guiding the future treatment of denture stomatitis.

Considerações sobre os tipos de próteses parciais removíveis e seu impacto na qualidade de vida / Considerations on types of removable partial dentures and their impact on oral health

O objetivo deste estudo foi discutir, por meio de uma revisão de literatura, as indicações, contraindicações, vantagens, desvantagens das alternativas reabilitadoras mais comuns utilizando PPRs e o impacto desses tratamentos na qualidade de vida relacionada à saúde bucal dos pacientes. Foi realizada uma pesquisa ampla na literatura, com a utilização dos termos "Prótese Parcial Removível", "Qualidade de Vida", "Saúde bucal"; "Satisfação do Paciente", no período entre 1990 e 2018, no Medline, Google Scholar, internet e livros didáticos. Foi demonstrado que a reabilitação com PPRs associadas a implantes resultou em melhor qualidade de vida associada à saúde bucal dos usuários, seguida por PPRs retidas por encaixe e PPRs convencionais. Entretanto, o profissional deve considerar as condições sistêmicas, bucais e econômicas de cada paciente, tendo o conhecimento biomecânico bem como a ciência dos benefícios e das desvantagens de cada tipo de tratamento para estabelecer um correto diagnóstico do caso e, assim, indicar o melhor tipo de PPR. Dessa forma, é possível oferecer o melhor tratamento para cada paciente parcialmente edêntulo, devolvendo estética e função de maneira satisfatória de modo a resultar em maior nível de satisfação e qualidade de vida(AU)

The purpose of this study was to discuss, through a review of the literature, indications, contraindications, advantages, disadvantages of the most common rehabilitation alternatives using RPDs and the impact of these treatments on patients' oral health quality of life. A broad research was conducted in the literature, using the terms "Partial Removable Prosthesis", "Quality of Life", "Oral Health"; "Patient Satisfaction" in the period between 1990 and 2018, in Medline, Google Scholar, internet and textbooks. It was demonstrated that rehabilitation with RPDs associated with implants resulted in a better oral health quality of life of users, followed by RPDs with attachments and conventional RPDs. However, the professional should consider the systemic, oral and economic conditions of each patient, based on the biomechanical knowledge, as well as the science of the benefits and disadvantages of each type of treatment to establish a correct diagnosis of the case, and thus, indicate the best type of RPD. In this way, it is possible to offer the best treatment for each partially edentulous patient, returning aesthetics and function in a satisfactory manner in order to result in a higher level of satisfaction and quality of life(AU)

Porosity, water sorption and solubility of denture base acrylic resins polymerized conventionally or in microwave

Abstract The proper selection of polymerization cycle is important to prevent overheating of the monomer that could cause degradation, porosity and, consequently, deleterious effects on the denture base properties. Objective This study evaluated the porosity, water sorption and solubility of acrylic resins (Vipi Cril-VC and Vipi Wave-VW) after conventional or microwave polymerization cycles. Material and Methods Specimens (n = 10) were made and cured: 1-WB = 65°C during 90 min + boiling during 90 min (VC cycle - control group); 2-M25 = 10 min at 270 W + 5 min at 0 W + 10 min at 360 W (VW cycle); 3-M3 = 3 min at 550 W; and 4-M5 = 5 min at 650 W. Afterward, they were polished and dried in a dessicator until a constant mass was reached. Specimens were then immersed in distilled water at 37°C and weighed regularly until a constant mass was achieved. For porosity, an additional weight was made with the specimen immediately immersed in distilled water. For water sorption and solubility, the specimens were dried again until equilibrium was reached. Data were submitted to 2 way-ANOVA and Tukey HSD (α=0.05). Results Porosity mean values below 1.52% with no significant difference among groups for both materials were observed. Resins showed water sorption and solubility values without a significant difference. However, there was a significant difference among groups for these both properties (P<0.013). The highest sorption (2.43%) and solubility (0.13%) values were obtained for WB and M3, respectively. Conclusions The conventional acrylic resin could be polymerized in a microwave since both the materials showed similar performance in the evaluated properties. Shorter microwave cycles could be used for both the materials without any detectable increase in volume porosity.

Efeito do desafio ácido nas propriedades superficiais das camadas externa e interna de dentes acrílicos reforçados / Effect of acid challenge on the surface properties of external and internal layers of cross-linked acrylic teeth

Introdução: Os dentes acrílicos artificiais devem apresentar característica de resistência aos ácidos, a fim de assegurar a manutenção de suas propriedades, ao longo de sua vida útil. Entretanto, não há estudos disponíveis na literatura pertinente sobre as propriedades superficiais de dureza e rugosidade das diferentes camadas de resina acrílica que compõem os dentes artificiais submetidos a ensaios de erosão simulada. Objetivo: Avaliar a dureza e rugosidade superficiais das camadas externa e interna de dentes artificiais acrílicos reforçados submetidos a desafio ácido. Metodologia: Molares (SR Postaris e Trilux) seccionados transversalmente foram avaliados inicialmente quanto à dureza Vickers e rugosidade. Esses ensaios foram repetidos após metade das amostras de cada tipo de dente (n=10) ser imersa em água destilada (controle) e outra metade em vinagre durante 15 min/dia por 28 dias. Os resultados foram analisados por ANOVA 2-critérios e teste de Tukey (α=0,05). Resultado: A dureza inicial da camada externa dos dois diferentes tipos de dente não sofreu alteração significativa pelo desafio ácido (p>0,05) e a imersão em vinagre não causou efeito deletério à dureza inicial da camada interna dos dois tipos de dentes avaliados (p>0,05). Após 28 dias, a rugosidade inicial de ambos os tipos de dentes estudados, para as duas camadas, não foi alterada com água ou vinagre (p>0,05). Conclusão: Os dentes acrílicos reforçados foram resistentes ao desafio ácido uma vez que suas camadas interna e externa não apresentaram alteração significativa de dureza e rugosidade superficiais.

Introduction: Artificial acrylic teeth must be resistant to acids for ensure the maintenance of their properties throughout their useful life. However, there are no studies available in the literature about the surface properties of hardness and roughness of the different layers of acrylic resin that make up the artificial teeth submitted to simulated erosion tests. Objective: To evaluate the surface hardness and roughness of external and internal layers of artificial cross-linked acrylic teeth submitted to acid challenge. Methodology: First molars (SR Postaris and Trilux) transversely sectioned had its Vickers hardness and roughness initially evaluated. These tests were repeated after half of the tooth samples (n=10) be immersed into distilled water (control) and half in vinegar during 15 min/day for 28 days. Data were analyzed using 2-way ANOVA and Tukey's test (α=0.05). Result: The initial external layers hardness of both was not significantly altered by acid challenge (p> 0.05) and the immersion in vinegar caused no deleterious effect on the initial internal layers hardness of the two tested teeth (p>0.05). After 28 days, the initial roughness of both teeth evaluated for the two layers was not affected by water or vinegar (p>0.05). Conclusion: The reinforced acrylic teeth were resistant to acid challenge since its internal and external layers showed no significant change in hardness and surface roughness.